Celtis Australis Research Articles

Celtis australis Exhibits Cytotoxic Effects by Inducing DNA Damage in Human Ovarian Cancer Cells

Native to the Mediterranean and southwest Asia, Celtis australis is used in folk medicine to treatment of many diseases such as peptic ulcer, diarrhea, dysentery, pain, and colic. However, there are very few studies on the effects of this species on cancer. We report for the first time the cytotoxic and genotoxic properties of C. australis on the human ovarian cancer cell line A2780.
 In the study, C. australis extract prepared in ethanol/phosphate buffer was applied to A2780 cells. The change in viability level in A2780 cells after treatment was determined by MTT assay and DNA damage was determined by single-cell gel electrophoresis (Comet) analysis.
 Our results showed that plant extract application at doses above 200 µg/ml significantly decreased A2780 cell viability (p

Vegetation–edaphic correlation and importance value index in himalayan ‘ecotone’ temperate conifer forest using the multivariate technique

Himalayan ‘Ecotone’ temperate conifer forest is the cradle of life for human survival and wildlife existence. In spite of the importance of these areas, they have not been studied in depth. This study aimed to quantify the floristic structure, important value index (IVI), topographic and edaphic variables between 2019 and 2020 utilizing circular quadrant method (10 m x 10 m). The upper-storey layer consisted of 17 tree species belongs to 12 families and 9 orders. Middle-storey shrubs comprised of 23 species representing 14 families and 12 orders. A total of 43 species of herbs, grasses, and ferns were identified from the ground-storey layer, representing 25 families and 21 orders. Upper-storey vegetation structure was dominated by Pinus roxburghii (22.45 %) and middle-storey by Dodonaea viscosa (7.69 %). However, the ground layer vegetation was diverse in species composition (43 species) and distribution. The floral vegetation structure was encompassing of three floral communities which were diverse in IVI, such as, in Piro–Aial (Group 2), Pinus roxburghii (54.46 x 15.94) had the highest IVI value, followed by Pinus wallichiana (45.21 x 14.85) in Piwa–Quin (Group 3) and Ailanthus altissima (22.84 x 19.25) in Aial–Qugal (Group 1). However, the IVI values for Aesculus indica, Celtis australis, and Quercus incana in Aial–Qugal (Group 1) were not determined due to low detection rate. Nevertheless, eleven of these species showed 0 IVI values in Piro–Aial (Group 2) and Piwa–Quin (Group 3). CCA ordination biplot illustrated the significant differences among floral communities and its distribution, which impacted by temperature, rainfall, soil pH, altitude, and topographic features. Ward's agglomerative clustering finding reflected 'Ecotone' temperate conifer forest is rich and diverse floristic structure.

Effects of urban tree pruning on ecosystem services performance

Pruning represents the main tree care activity in cities, where it is carried out to reduce wind-break risk, to ensure road visibility, to reduce infrastructure interactions and damages, and last but not least, for aesthetic reasons. However, pruning is also proven to increase tree susceptibility to disease and it can potentially affect their capacity to provide ecosystem services (ES). This study aims to assess the effect of three different life-long pruning scenarios on urban trees PM10 capture and CO2 stock performance. The total carbon balance of twelve tree species (Acer platanoides L., Cedrus spp., Celtis australis L., Cupressus arizonica Greene, Cupressus sempervirens L., Pinus halepensis Mill., Pinus nigra J.F. Arnold, Pinus pinea L. Platanus hybrida Brot., Populus nigra L. var. 'Italica', Quercus ilex L., and Tilia cordata Mill.) was evaluated, including the disposal of the pruning residues of the trees. In all management scenarios studied, pruning represented an opportunity to increase the crown Carbon stock up to 65 %, taking into account the full reestablishment of the crown. The results suggest considering more frequent and less intense ordinary pruning scenarios as a preferable tree management strategy to optimise the tree ES performance and minimise branch dieback occurrence. In addition, the analysis carried out on four different waste wood disposal methods showed that the open dump scenario was the lowest CO2 eq re-emission choice.

Comparative evaluation of native top feeds of western Himalayas for utilization as goat's ration in mash and block form.

The current research was undertaken to scrutinize the effect of leaf meal mixture as concentrate mixture in the ration of goats. Leaf meal mixture (LMM) was prepared using equal quantities of ten top-foliages namely Acacia nilotica, Celtis australis, Ficus palmata, Ficus religiosa, Grewia optiva, Melia azadarach, Morus alba, Quercus incana, Salix alba and Zizyphus jujube obtained from district Poonch of Jammu region in western Himalayas. The LMM prepared was substituted for 15% in the concentrate mixture being fed to the goats. The study constituted of two trials. Concentrate mixture offered to the animals was in mash and multi-nutrient block in first and second trial respectively. A total of twelve non-descript, adult male goats were selected for each trial. Goats of 0-14months age (27.71 ± 2.96kg live body weight) of for first trial while goats of 12-16months age (27.02 ± 2.93kg live weight) for second trial were divided into control and treatment groups as per randomized block design and fed ad-lib wheat straw and concentrate mixture @ (20g/kgW0.75). No significant variation was observed (p > 0.05) in body weight, feed and DM intake among all groups in both trials. Comparable intake as well as digestibility of various nutrients like DM, OM, CP, EE, CF, NFE, NDF, ADF and TDN were found between the two groups during individual trials. There was a positive nitrogen, calcium and phosphorus balance among all experimental animals in both the trials. Serum enzymes ALT, AST and haemato-biochemical parameters like total protein, albumin, globulin, albumin: globulin and blood urea nitrogen (BUN) showed no significant differences during both trials in all groups, being within normal physiological levels. However, haemoglobin concentration was significantly higher (P < 0.05) in treatment group with respect to the control group in first trial. On the basis of current results, it can be established that leaf meal mixture can successfully be used to replace concentrate mixture up to 15% in the ration of goats without expecting any adverse impacts on their growth and overall health.

Measuring forest health at stand level: A multi-indicator evaluation for use in adaptive management and policy

Assessments of forest ecosystem health for use in adaptive management need an integrative multi-indicator examination at the stand scale. To assess forest health, we exained multiple forest indicators including diversity, age structure, regeneration, and edaphic factors of the dominant and associated tree species in their natural forest habitats. A stratified random cluster sampling strategy was used to gather vegetation samples from the five main forest types in the Zabarwan Mountain Range—Acacia forest (ACFT), Broad leaved forest (BLFT), Oak forest (OKFT), Pinus wallichiana forest (PWFT), and Scrub forest (SRFT). The Pearson method and canonical correspondence analysis (CCA) were used to investigate the relationship between tree species and edaphic factors. A total of 22 tree species were found, of which 13 were exotic and 9 were native. The proportion of exotic species was highest in OKFT (85%), followed by BLFT (75%), and the least (50%) SRFT. The BLFT forest type had the highest Shannon diversity while the lowest was the SRFT. ACFT and BLFT forest types have significantly higher Shannon diversity indexes than other forest types. Based on the density-girth class distribution, ACFT & SRFT forest types showed an Inverse-J distribution pattern, indicating a stable population structure. The dominant tree species, such as Populus alba in BLFT, demonstrated comparatively no regeneration, whereas Parrotiopsis jacquemontiana in SRFT, Pinus wallichiana in PWFT, Quercus robur in OKFT, and Robinia pseudoacacia demonstrated adequate regeneration performance. Overall exotic tree species such as Robinia pseudoacacia, Prunus cerasifera, Celtis australis, and Ailanthus altissima showed high/sufficient regeneration performance. The average seedling/tree value for all forest types in the area was 2.14, with the highest value at BLFT (3.61) and the lowest value at SRFT (0.71). In the CCA it showed that SRFT forests were greatly influenced by salinity and organic carbon, whereas ACFT and OKFT forests had comparable habitat preferences and were mutually influenced by electrical conductance and phosphorus availability. Prunus cerasifera was the only species positively associated with available calcium. By combining the data of numerous field-based indicators into a single integrated study, our research will give decision-makers an update on a forest's current and anticipated health.

Redrawing the History of Celtis australis in the Mediterranean Basin under Pleistocene–Holocene Climate Shifts

Celtis australis remains are usually present in Palaeolithic sites of the Mediterranean Basin. However, their uncharred state of preservation and the absence of wood charcoal remains of this species raise some doubts regarding the contemporaneity of the remains and the deposit wherein they were found. The mineral composition of their endocarps and their possible use as food lead us to discuss the available data of Celtis australis during Prehistory. In this paper, the history of this species from the Lower Pleistocene to the Middle Holocene is reconstructed, considering the impact of the Quaternary climatic changes on its geographical distribution. The nutritional composition of Celtis australis fruits is analysed to assess their current value and potential as food, especially in Palaeolithic contexts. Based on these issues, the doubts about its presence in these contexts are dispelled and possibly explained by intentional human gathering in some sites, considering the high content in carbohydrates, proteins and minerals of their fruits. The chronological and geographical distribution of the Celtis spp. remains shows a coherence, which only the variations in the distribution of this taxon according to the regional climatic conditions can explain, especially disturbed by cold fluctuations, such as MIS 10 or 2. The radiocarbon dating presented here demonstrates the unquestionable presence of Celtis sp. in the Iberian Mediterranean Basin during MIS 3.

Urban Green System Planning Insights for a Spatialized Balance between PM10 Dust Retention Capacity of Trees and Urban Vehicular PM10 Emissions

Reducing air pollution is a crucial challenge in urban areas. In this regard, urban green infrastructures could play a pivotal role. In the literature, scholars analyzed both the ability of species-specific and layout-specific green infrastructures to reduce air pollution and the best location sites of new green infrastructures to increase the provision of overall ecosystem services. There is a lack of studies helping green urban planners and designers choose where and which green infrastructure to implement based on vegetation species-specific performance and differentiated demand for the ecosystem services of city areas. This paper uses tree cadastre data from a medium-sized city in central Italy (Perugia) and the traffic open-layers of Gmaps to develop a spatial analysis of the urban trees’ performance in PM10 dust retention, and the PM10 produced by vehicular emissions, respectively. The method generates a spatialized balance between demand (air-polluted sites by traffic) and supply (PM10 dust retention by trees) to support local decisions about the best locations for new green infrastructures and the choice between species. The paper analyzed 6710 urban trees in an area of 42.62 km2 with a linear road density of 15 km/km2. Platanus hybrida Mill. ex Münchh, Celtis australis L., Ulmus carpinifolia L., Pinus pinaster Aiton, Quercus ilex L., Quercus robur L., and Tilia cordata Mill. are the resulting optimal species to reduce PM10, with median values of 219.62, 181.47, 166.67, 154.66, 143.90, 118.61, and 118.04 g tree−1 yr−1, respectively. The paper is a first contribution in developing GIS-based tools that vary the recommended location sites and species for new green infrastructures based on the demanded ecosystem service. Urban planners are called to dynamically use and integrate numerous tools, such as the one developed here, to seek complex solutions capable of increasing the sustainability of urban systems.

Effects of pavements on diversity and activity of mycorrhizal symbionts associated with urban trees

This study investigated the impact of different types of soil sealing on the communities of a group of beneficial plant symbionts, arbuscular mycorrhizal fungi (AMF), colonizing the roots of two shade trees, Celtis australis and Fraxinus ornus, frequently grown in urbanized sites. Such plants were grown in an experimental site, in northern Italy, established in November 2011 and subjected to four different pavement treatments: impermeable monolithic asphalt, permeable pavers, permeable concrete and unpaved soil. The diversity and composition of root AMF communities were assessed by PCR denaturating gradient gel electrophoresis of partial 18S rRNA gene, AMF taxa were identified by amplicon sequencing and mycorrhizal colonization was evaluated after root clearing and staining. For the first time, our molecular work revealed that impermeable pavements induced shifts in the composition of AMF communities associated to the roots of C. australis and F. ornus and impacted on the percentage of mycorrhizal root length. When the root-zone was covered with permeable pavements, a similar AMF community as that observed in the unpaved soil was detected, providing novel information to be utilised for reducing the disturbance caused by specific types of soil sealing on AMF symbionts, which play a key role in plant nutrition and health. A total of 45 AMF sequence types were detected, with Sclerocystis and Septoglomus as the most abundant phylotypes, accounting for 84% of the sequences. The predominance of Sclerocystis species in the roots of both tree species under impermeable pavements indicated their high and unforeseen tolerance towards harsh environmental conditions. Such species could be utilized as AMF inocula specifically selected for their proven resilience in paved sites, in order to exploit their ability to boost biogeochemical processes fundamental for energy fluxes and plant nutrition and health.

Natural extracts against agricultural pathogens: A case study of Celtis australis L.

Plant extracts and other plant products have been used as an alternative to synthetic fungicides or an additional way to reduce their use. The choice of plant extracts and their application depends on their functional characteristics, availability, cost-effectiveness, and their impact on phytopathogens, and also on the environment. Therefore, the present study aims to assess the potential of Celtis australis methanolic extracts as source of compounds with antifungal activity. Methanolic extracts prepared from leaves and unripe mesocarps of C.australis collected from different localities of Montenegro (Podgorica-PG, Donja Gorica-DG, and Bar-BR) were evaluated for their phenolic compounds' composition as well as antifungal and cytotoxic properties. Obtained results revealed that extracts contain various bioactive constituents including phenolic acids, flavonoids, and their derivatives. The predominant phenolic acid was ferulic acid, identified in leaf samples from DG (187.97 mg/100 g dw), while isoorientin was the most abundant phenolic compound found in all examined samples. Regarding antifungal potential of the tested samples, all but one (prepared from mesocarp BR) possessed higher activity than Previcur, a commercial systemic fungicide intended to control seedlings. In vitro studies on HaCaT cell line showed that the extracts had no toxic effect toward the tested cell line. These results lead to the conclusion that methanolic extracts of C.australis can become an alternative to the use of synthetic fungicides in agriculture. Those extracts represent natural biodegradable fungicides and enable more efficient control of pathogenic fungi.

Object-based classification of urban plant species from very high-resolution satellite imagery

Cities are facing too many challenges. Urban vegetation, in particular trees, are essential as they provide services in terms of air pollution mitigation, freshness, biodiversity, and citizens’ well-being. Accurate data on location, species, and structural characteristics are essential for quantifying their benefits. However, the cost of measuring thousands of individual trees through field campaigns can be prohibitive and reliable information on domestic gardens is lacking due to difficulties in acquiring systematic data. The main objective of this study was to investigate the suitability of very-high resolution satellite imagery, e.g., WorldView-2, for detecting, delineating, and classifying the urban plant species in both public and private areas. The characterization of urban vegetation is difficult due to the complexity of the urban environment (buildings, shadows, open courtyards), the diversity of species and the spatial proximity between trees. To overcome these constraints, an object-based classification was developed with the selection of new relevant spectral and texture-based features for each plant species. Four spectral bands (blue, green, yellow, red) and four texture features (i.e., energy, entropy, inverse difference moment, Haralick correlation) were found to be the most efficient attributes for object-based classification from WV-2 images. Then, a classification of plant species, by using a Random Forest classifier, and ground validation were performed. In the two study areas, Aix-en-Provence (France) and Florence (Italy), 22 and 20 dominant plant species, and grassland, were identified and classified with an overall accuracy of 84% and 83%, respectively. The highest classification accuracy was obtained for Pinus spp. and Platanus acerifolia in Aix-en-Provence, and for Celtis australis and Cupressus sempervirens in Florence. The lowest classification accuracy was obtained for Quercus spp. in Aix-en-Provence, and Magnolia grandiflora in Florence.

Species-Specific Contribution to Atmospheric Carbon and Pollutant Removal: Case Studies in Two Italian Municipalities

In order to maximize ecosystem services (ES), a proper planning of urban green areas is needed. In this study, the urban greenery of two Italian cities (Milan and Bologna) exposed to high levels of atmospheric pollutants was examined. Vegetation maps were developed through a supervised classification algorithm, trained over remote sensing images, integrated by local trees inventory, and used as input for the AIRTREE multi-layer canopy model. In both cities, a large presence of deciduous broadleaves was found, which showed a higher capacity to sequestrate CO2 (3,953,280 g m2 y−1), O3 (5677.76 g m2 y−1), and NO2 (2358.30 g m2 y−1) when compared to evergreen needle leaves that, on the other hand, showed higher performances in particulate matter removal (14,711.29 g m2 y−1 and 1964.91 g m2 y−1 for PM10 and PM2,5, respectively). We identified tree species with the highest carbon uptake capacity with values up to 1025.47 g CO2 m2 y−1 for Celtis australis, Platanus x acerifolia, Ulmus pumila, and Quercus rubra. In light of forthcoming and unprecedent policy measures to plant millions of trees in the urban areas, our study highlights the importance of developing an integrated approach that combines modelling and satellite data to link air quality and the functionality of green plants as key elements in improving the delivery of ES in cities.

Vegetation Assemblage and Carbon Stock in the Sacred Groves of Kathmandu Valley, Nepal

Sacred groves (SG) play crucial roles in maintaining vegetation diversity and storing carbon. In Nepal, there is relatively little information about the carbon sequestration potential of SGs compared to other forest types. To address this research gap, this study analyzed the vegetation assemblage and carbon stock in three SGs, namely Bajrabarahi, Mhepi, and Swayambhu forests, located in the Kathmandu Valley. Systematically distributed square plots (15 m × 15 m) were used as sampling units. Above-ground tree biomass and below-ground tree biomass were estimated by using the allometric equation of trees, considering the diameter, height, and specific gravity of wood. A total of 479 individuals of woody species belonging to 37 species were recorded from the three SGs. Species diversity and species richness were relatively higher in Swayambhu SG. Based on the importance value index, Celtis australis, Schimawallichii, and Neolitseacuipala were dominant in Mhepi, Swayambhu, and Bajrabarahi SGs, respectively. Total biomass and carbon stock were highest in the Bajrabarahi Forest and lowest in the Swayambhu Forest. The average biomass and carbon stock in the three urban SGs were approximately 405 ton/ha and 191 ton/ha, respectively. The findings of the present study suggested that maintaining vegetation assemblage, biomass, and carbon stock in SGs might have important contributions to sequestering carbon, conserving biodiversity, and enhancing the aesthetic values of the religious areas.

Ethnobotany, phytochemistry and pharmacological activities of Celtis australis: A review

Celtis australis is a deciduous plant used worldwide in folk medicine to treat various ailments, such as stomach disorders, cough, pimples, joint pain, amenorrhoea, rheumatism, menstrual disorders, and herpes. The present review aims to document and summarize different works regarding the ethnomedicinal uses, phytochemistry, and biological activities of different parts (fruits, barks, leaves, and seeds) of this medicinal plant. For data collection, Google scholar, Science direct, Scopus, PubChem, and PubMed databases were used. This study shows that C. australis contains several bioactive compounds, exhibiting various pharmacological activities mainly hepatoprotective, analgesic, anti-inflammatory, cytotoxic, antioxidant, and antimicrobial properties. Thus, C. australis is a promising plant that can be exploited in the treatment of various diseases.

STUDIES ON THE CELTIS AUSTRALIS L. SEEDS PREPARATION METHODS IN ORDER TO SPEED UP GERMINATION

Celtis australis L., is a tree up to 20 m tall. The range is Mediterranean to the Caucasus, in Romania it is found sporadically in Banat, Oltenia and Dobrogea, the species being used in green spaces where it is planted in alignment, isolated or in massifs, but also on the Black Sea Coast has adapted very well. The genus includes about 70 species, trees and shrubs widespread in the northern hemisphere, from tropical to temperate regions. The elm-like branch is distichous. The stalk has a broken marrow, made up of very thick blades, asymmetrical leaves with 3 ribs at the base, polygamous, andromonoic flowers, the male ones in bundles at the base of the stalk, the hermaphroditic ones arranged at the base of the petiole of the leaves, usually solitary. Fruits are spherical or ovoid drupes, with a strong stone and a thin, fleshy mesocarp. The purpose of this experiment is to speed up the germination of seeds that have been prepared in the four variants: stratification, wetting with hot water, scarification, wetting with cold water. Biometric measurements were performed on the following morphological features: seedling stem height, stem diameter, number of roots, root length, number of leaves, leaf area. Analyzing the four methods of seed treatment related to chemical treatment (control) it is observed that the best results are at V1 (stratification) for all analyzed characters.

Seasonal and Altitudinal Variation in Chemical Composition of Celtis australis L. Tree Foliage

Celtis australis is an important agroforestry tree in the Himalayan region providing major fodder to the livestock and many other needs for sustaining life in local rural communities. Including their fodder value and wide altitudinal distribution ranges, it is extracted by the villagers in large scale during the lean period (May to June). Thus, the aim was to understand the nutritive values of the species influenced by the altitude and harvesting season. For this investigation, leaves of C. australis were collected from four different altitudes during the months of February to December. The nutritive value of collected foliage, i.e., dry matter, ash, potassium, calcium, phosphorus, crude protein, crude fiber, starch, sugar, and phenolic were estimated by using stranded methods. The results of present study reveal that significant seasonal variations have been observed for the chemical composition of C. australis tree foliage collected from different altitudes. On an average, between seasons, crude protein ranged from 9.17 to 16.97%, phosphorus 0.08 to 0.16%, potassium 0.28 to 0.76%, crude fiber 13.94 to 19.80%, sugars 1.11 to 1.83%, and starch 4.79 to 6.53%. Altitude also significantly influenced nutritive content. Between altitudes, phosphorus ranged from 0.10 to 0.11%, potassium 0.42 to 0.50%, crude protein 12.66 to 14.02%, crude fiber 1.61 to 1.71%, sugars 1.45 to 1.66%, starch 4.71 to 6.31%, and phenolic 0.43 to 0.78%. Potassium, calcium, crude protein, and starch were significantly positively correlated with altitude of foliage collection. However, dry matter content, phosphorus, and soluble sugars, significantly correlated inversely with altitude.

The floristic quality assessment index as ecological health indicator for forest vegetation: A case study from Zabarwan Mountain Range, Himalayas

Evaluations ecosystem health-based field studies can assist decision-makers in formulating more targeted conservation policies to better manage ecosystems and landscape. To analyze forest characteristics in the Zabarwan Mountain Range we used the Floristic Quality Assessment Index (FQAI) technique to evaluate the ecosystem health status of the vegetation. According to our findings, the forest area showed an FQAI rating of 61.41. The FQAI ranked 54 of the plant species growing in the forest region at 0, 30 species at 1–3, 51 species at 4–6, 30 species at 7–8, and 17 species at 9–10. Of the 54 alien species ranking 0, thirteen species were invasive, 36 were naturalized, and five were casual. Amoung the forest types, the Broadleaved forest harbored most alien species (35%) and the scrub forest the least (6%). Based on habitat-wise distribution, the largest (38%) species pool was observed in natural forest habitats, while human-modified habitat types harbord 51% of species. Roadsides exhibited the by far highest alien species number (45%) together with other anthropogenic habitats. The investigation of indicator species revealed a separation between the various ranking groups, as evidenced by high indicator values. Important alien indicator species ranking 0 were i.e., Aesculus indica, Ailanthus altissima, Celtis australis, Daucus carota, Poa bulbosa, Prunus armeniaca, Prunus cerasus, Quercus robur, and Salix alba, which showed a significant p-value for indicator species analysis. The findings of this study provide a method for measuring vegetation communities' responses to alien invasions and as a result can serve for developing management methods to preserve ecosystems, particularly in protected areas, from this biodiversity threat.

Seasonal variations in the nutritive value of fifteen multipurpose fodder tree species: A case study of north-western Himalayan mid-hills.

Multipurpose tree species are recognized as an important fodder source for livestock, but their potential remains untapped due to dearth of knowledge about their nutritive value. Therefore, 15 MPTs, i.e., Acacia catechu, Albizia chinensis, Bauhinia variegata, Celtis australis, Ficus roxburghii, Grewia optiva, Leucaena leucocephala, Melia composita, Morus serrata, Olea glandulifera, Ougienia oojeinensis, Pittosporum floribundum, Quercus glauca, Q. leucotrichophora and Salix tetrasperma were evaluated for nutritional characteristics, relative nutritive value index (RNVI), palatability index and farmers' preference on a seasonal basis in north-western Himalayas mid-hills. Most of the nutritive and mineral content decreased as leaves matured with the exception of ether extract, calcium, copper, organic matter and carbohydrate content, while cell-wall constituents and anti-nutritional contents increased. Overall, M. serrata had the highest RNVI in spring and summer, while G. optiva during autumn and winter. Similarly, L. leucocephala had the highest palatability (97.86%), while M. composita (38.47%) had the lowest one. Additionally, G. optiva was the most favored MPT for livestock among farmers, while M. composita was the least ones. The outcome of the study will help policy makers, planners and farm managers in establishing large scale plantations of highly nutritious and palatable species, like G. optiva, L. leucocephala, B. variegata, and M. serrata for year-round supply of green leaves and as a supplement to low-quality feed.

Fatty acids and minor functional compounds of hemp (Cannabis sativa L.) seeds and other Cannabaceae species

Nowadays, hemp (Cannabis sativa) seeds are receiving increased attention because of their high nutritional value. Among other nutrients, they contain a PUFA- and bioactive compounds-rich oil. Accordingly, this work was focused to establish the fatty acids (FA) content, the regiospecificity of triacylglycerols, and to quantify several bioactive compounds of relevant hemp seeds varieties and related taxa. Eight varieties of unhusked hemp seeds and eight samples of commercial husked hemp seeds were studied, and other Cannabaceae seeds: those from hop (Humulus lupulus) and European hackberry (Celtis australis). We found that all hemp seeds varieties constitute a rich source of essential PUFA as linoleic and α-linolenic acids, as well as oleic acid. PUFA were mostly distributed at the sn-2 position of triacylglycerols, thus, being highly bioaccessible, while SFA were mostly located at the sn-1,3 positions. The n–6/n–3 PUFA ratio was found to be nutritionally advantageous. Vitamin E compounds were noticeable, and γ-tocopherol was the major tocol found. Regarding phytosterols, campesterol and β-sitosterol were the most prominent compounds, while squalene content was also noticeable. Overall, the lipid fraction of hemp seeds can be considered as a source of essential and bioactive FA as well as an antioxidant- and cholesterol-lowering bioactive compounds-containing functional food.

Adaptability of indigenous vegetation on parking lots – A case study: Tree alleys in Novi Sad, Serbia

In this study five indigenous species on parking lots in Novi Sad, Serbia were examined (Acer platanoides ‘Globosum’, Celtis australis L., Tilia tomentosa Moench., Carpinus betulus ‘Fastigiata’, and Corylus colurna L.). The aim of this study is to represent their adaptability to urban stress and harsh environmental conditions which are present on parking lots by valuing their dimensions and vitality. Results showed that well-adapted species are Celtis australis L. and Carpinus betulus ‘Fastigiata’. Other species had low vitality values, asymmetrical canopy, and mechanical damages that were caused by insufficient root and canopy space and insufficient distance from buildings and traffic. Choosing well-adapted indigenous species for alleys can be very challenging. Adaptability assessment of indigenous trees on parking lots in Novi Sad can be used as guidance to urban planning in Novi Sad and other cities which have a high share of pavement to reduce the climate change effect.

Species-specific efficiency in PM2.5 removal by urban trees: From leaf measurements to improved modeling estimates

The growing population in cities is causing a deterioration of air quality due to the emission of pollutants, causing serious health impacts. Trees and urban forests can contribute through the interception and removal of air pollutants such as particulate matter (PM). The dry deposition of PM by vegetation depends on air pollutant concentration, meteorological conditions, and specific leaf traits. Several studies explored the ability of different plant species to accumulate PM on leaf structures leading to the development of models to quantify the PM removal. The i-Tree Eco is the most used model to evaluate ecosystem services provided by urban trees. However, fine particulate matter (PM2.5) removal is still calculated with a poorly evaluated function of deposition velocity (which depends on wind speed and leaf area) without differentiating between tree species. Therefore, we present an improvement of the standard model calculation introducing a leaf trait index to distinguish the species effect on PM net removal. We also compared model results with measurements of deposited leaf PM by vacuum filtration. The index includes the effect of morphological and functional leaf characteristics of tree species using four parameters: leaf water storage, deposition velocity, resuspension rate and leaf washing capacity. Leaves of 11 common urban tree species were sampled in representative areas of the city of Ferrara (Italy) and at different times of the year from 2018 to 2021. This includes four deciduous broadleaf trees (Tilia cordata, Platanus acerifolia, Acer platanoides, Celtis australis), three evergreen broadleaf trees (Quercus ilex, Magnolia grandiflora, Nerium oleander), and four conifers (Thuja orientalis, Cedrus libani, Pinus pinaster, Picea abies). The results provide significant advancement in assessing PM removal using decision support tools such as models to properly select tree species for future urban tree planting programs aimed at improving air quality.